A project record, not a catalogue. We deliver outdoor and indoor basketball courts, from backyard half-courts to school gyms and city stadiums. The systems differ because the sites did.
What these projects have in common?
Different countries, different climates, yet the same three questions decide every court: what the base can support, what weather exposure the surface must withstand, and who will play on it. The systems differ because the answers differ, not because one surface is better than another.
Most of the collection is outdoor PP interlocking tile: backyards, gardens, school yards and community courts, where drainage and repairability matter more than a seamless finish. The rest is maple hardwood indoors, where ball rebound and consistent footing set the specification; acrylic and silicon PU outdoors, where a painted seamless finish carries the design; and PVC roll indoors, when the project is a wood-look court on a fixed budget.
That range is the useful part of a project collection, it is a map of which system wins under which conditions, before anyone starts talking about price.
Which basketball court flooring system fits?
|
System |
Best for |
Base |
Installation |
Maintenance |
|
PP interlocking tile |
Outdoor multi-use: gardens, schools, community and backyard courts; the only system here that can be lifted and re-laid |
Concrete, asphalt, compacted gravel; lawn for light family use |
No adhesive, hand tools, tiles clip together |
Sweep and rinse; replace single tiles |
|
Acrylic coating |
Seamless painted outdoor courts with strong colour design |
Cured, primed asphalt or concrete |
Applied on site in layers, needs curing time |
Clean; recoat to refresh colour |
|
Silicon PU |
Humid or high-UV outdoor courts wanting a thicker seamless surface than acrylic |
Asphalt or concrete |
Multi-layer trowel application |
Clean; periodic top coat |
|
Maple hardwood |
Indoor competition and school gyms; consistent ball rebound and footing |
Suspended keel and subfloor system |
Built on site by flooring specialists |
Dust-mop; sand and refinish |
|
PVC sports roll |
Indoor multi-use halls where budget and installation time decide |
Smooth, dry, level subfloor |
Rolled out and adhered |
Clean; no sanding |
Outdoor builds in this collection use PP tile, acrylic or silicon PU. Indoor competition courts use maple hardwood. PVC appears where the brief is a wood-look indoor court on a fixed budget.
Indoor or outdoor: what actually changes
Four things separate a good indoor court from a good outdoor one, and none of them is the surface colour.
Base and drainage. Outdoors, water has to leave the court: open-grid tile drains through the surface, while acrylic and silicon PU depend on a graded base and a fall to the edge. Indoors, the base is a slab, and the work is flatness and moisture control.
How the surface moves. A modular tile system moves with freeze-thaw and can be lifted, re-levelled and re-laid. A seamless system has no joints to open, but a repair is a local patch. A suspended hardwood floor is a built structure — joists, subfloor, elastic pads — and needs specialist installation.
Ball response and footing. Hardwood is the reference for indoor competition. PVC is the common choice for multi-use halls and school sport, where the court has to serve several sports and a tighter budget. Outdoors, tile and acrylic are firmer underfoot than a suspended timber floor, and the surface texture does the grip work in the wet.
Maintenance. Sweep and rinse for tile; clean and recoat for acrylic; dust-mop and refinish for hardwood; clean, no sanding, for PVC.
In a monsoon climate the same rules apply, but the order changes: drainage and UV move to the top of the specification, and colour stability stops being a cosmetic question.
Court size and material quantities
Start with the playing area, then add what the playing area does not include.
|
Format |
Dimensions |
Playing area |
|
FIBA full court |
28 × 15 m |
420 m² |
|
Half court |
14 × 15 m |
210 m² |
|
FIBA 3x3 |
15 × 11 m |
165 m² |
|
NBA court |
28.65 × 15.24 m |
437 m² |
Three allowances sit outside that number, and they are the usual reason a quote and a site measurement disagree.
Waste and edges. Add 5–10% for edge cuts, perimeter ramps and future repairs. On a 420 m² court that is 21 m² of extra material — not a rounding error on site.
Run-off. A full court with two-metre run-off needs roughly 32 × 19 m, not 28 × 15 m. Indoor halls often have less; outdoor community courts usually need more.
Base. Tiles, acrylic and silicon PU all need a stable, drained base, and base works are often the largest line outside the surface itself. A court that pools water is a base problem, not a tile problem.
How a project runs
Site check. Dimensions, base type, slope and drainage, delivery access, and photos from four corners.
System selection. Matched to exposure, intensity of use, base and budget — one recommendation, not a catalogue.
Line layout and shop drawings. Court markings to scale, colour blocking, logo artwork, tile direction.
Production and quality control. One production batch per colour, so field, key and border match the approved sample.
Delivery and installation. Container loading, edge ramps and trim, laying sequence, and support during installation.
Scope is agreed per project: surface supply only, or supply with installation support.
FAQ
1. What is the best flooring for an outdoor basketball court?
It depends on exposure and finish, not price alone. PP interlocking tile is the practical default for gardens, schools and community courts: it drains through the surface, needs no adhesive and can be lifted and re-laid. Acrylic gives a seamless painted court with strong colour on a cured asphalt or concrete base. Silicon PU adds a thicker, more forgiving seamless surface for humid, high-UV sites.
2. How much does a basketball court flooring project cost?
Four things move the number: playing area, system, base works and freight. A 210 m² half-court and a 420 m² full court are different projects before material is chosen; acrylic and silicon PU include on-site application, while tile arrives as a finished product; and base preparation is often the largest line outside the surface. Send the dimensions, site photos and base type, and we will quote system, bill of materials and freight separately so the comparison is like for like.
3. Can the tiles be laid on grass, soil or concrete?
Concrete, asphalt and compacted gravel are the standard bases and give the most stable court. Tiles can be laid over an existing lawn for light family use, but a stable, drained base is the better long-term choice for regular or competitive play. Soil alone is not a base — it moves when it rains.
4. Do interlocking tiles need glue or specialist tools?
No. The tiles clip together by hand and can be cut with hand tools at edges and corners. There is no curing time, so a backyard court can be playable the same day.
5. How is standing water handled?
Two things together: an open-grid tile that lets water pass through the surface, and a base with a fall to a drain or edge. Tiles alone will not fix a base that holds water. Edge ramps and trim close the perimeter so water does not sit against the last row.
6. Indoor court: hardwood, PVC or acrylic?
Hardwood for competition — it can be sanded and refinished rather than replaced. PVC sports roll for multi-use indoor halls and tighter budgets; it installs faster and needs no sanding. Acrylic is an outdoor system.
7. Can colours, markings and logos be customised?
Yes — every project in this collection is a custom layout, from club logos and two-tone keys to multi-sport line sets that share one surface. Colour is controlled per production batch, so field, key and border match the approved sample.
8. Do you supply wholesale and export to the Philippines, Malaysia or Indonesia?
Yes. Projects are supplied direct from Guangzhou, as complete court packages or bulk tile orders, with freight and duties quoted per destination. The builds in this collection include the Philippines, Malaysia and Sri Lanka, which are the closest reference points for South-East Asian sites; Indonesia is quoted on the same basis.
Send us your court
Four things get you a usable recommendation:
• Court dimensions, or site photos from the four corners
• Indoor or outdoor, and what the base is now
• Which sports and markings the court needs
• Target date and destination port