GZUNISPORT has gained wide recognition in the global market for its high-quality outdoor sports acrylic paints and professional services. Acrylic paints are specially formulated to have extremely high wear resistance and can withstand high-intensity sports friction, making them suitable for a variety of outdoor sports venues. Whether it is a basketball court, tennis court or multi-purpose sports venue, GZUNISPORT's acrylic paints can provide a long-lasting service life. Acrylic paints have excellent weather resistance and can maintain stable performance and appearance in various climate conditions.

What is Acrylic Sports Flooring?

The professionalism and stability of acrylic materials can meet the needs of investors in the market. It is a water-based material, and it is a floor made of vinyl substances mixed with emulsification and water solvents. The actual principle is to trigger self-polymerization under light and heat conditions.

What are the construction steps of acrylic sports floor coating?

Construction preparation

Material preparation

Acrylic coating: primer, caulking material, midcoat, topcoat (different colors can be selected).

Auxiliary materials: interface agent, filler, diluent (depending on the situation).

Tools and equipment: scraper, roller, mixer, leveler, cleaning tool.

Site requirements

Base ground: It is recommended to be concrete or asphalt, with a flat and solid surface.

Ground flatness: The error of a 3-meter ruler does not exceed 3mm.

Ground drainage slope: It is recommended to be 1% to 1.5%.

Dryness: The moisture content should be less than 8%.

Environmental requirements

Construction temperature: above 5℃ and below 35℃.

Humidity: It is not suitable to construct in an environment with a relative humidity higher than 85%.

Weather: No rain or snow, ensure no precipitation within 24 hours.

Construction process

1. Foundation treatment

Clean the ground: remove oil, dust and loose particles.

Leveling and repair: Use interface agent and cement mortar to repair cracks and potholes.

Sanding: Slightly sand the whole surface to improve adhesion.

2. Apply primer

Use acrylic primer and add water in a 1:1 ratio (according to the manufacturer's recommendations).

Use a roller or spray to apply evenly to enhance the basic adhesion.

Drying time: about 4-6 hours (depending on the environment).

3. Caulking and leveling

Use acrylic caulking material to repair cracks and joints on the ground.

Use acrylic leveling material to scrape and apply to ensure that the ground is flat.

Sand and trim after drying.

4. Middle coating

Middle coating ratio: acrylic paint + quartz sand (medium and coarse particles) + water.

Construction method: Use a rubber scraper to scrape 2-3 times.

Function: Increase the friction coefficient and provide comfortable sports performance.

Apply each layer 6-8 hours apart.

5. Topcoat

Topcoat ratio: acrylic topcoat + appropriate amount of water.

Use a roller or spray to apply 2 times to ensure uniform color.

You can choose a topcoat with better UV resistance according to your needs.

6. Marking

Use special acrylic marking paint to mark the sports line according to the standard size.

The marking should be uniform and without burrs.

Acceptance criteria

Flatness: no obvious bumps and no water accumulation.

Color: smooth surface and uniform color.

Adhesion: no peeling when scraped by hand.

Marking: clear and without breaks, in line with the size specifications of the sports field.

Maintenance suggestions

First use: can be put into use 7 days after the construction is completed.

Cleaning and maintenance: rinse with clean water regularly to avoid scratches by sharp objects.

Use restrictions: avoid heavy objects hitting and prevent chemical corrosion.

What are the advantages of acrylic sports flooring?

1. Strong durability

Acrylic sports flooring has excellent wear resistance and anti-aging properties, can withstand high-intensity exercise and long-term use without damage, and has a long service life.

2. Environmental protection and health

Made of environmentally friendly materials, non-toxic and harmless, in line with international environmental standards, and posing no threat to the health of athletes and users.

3. Excellent anti-slip performance

The surface of acrylic sports flooring has a special anti-slip coating design, which can provide good friction in dry and wet environments to ensure sports safety.

4. Rich colors

GZUNISPORT offers a variety of color options, the floor color is bright and not easy to fade, which can enhance the beauty of the venue and increase the recognition of the venue.

5. Wide adaptability

Acrylic sports flooring is suitable for a variety of venues, such as basketball, tennis, badminton, volleyball, etc., and is widely used in indoor and outdoor sports venues.

6. Easy maintenance

The floor surface is smooth and stain-resistant, and daily cleaning and maintenance are simple, reducing the maintenance cost of long-term use.

7. Excellent elasticity and cushioning performance

Acrylic materials have excellent elasticity and cushioning performance, which can reduce the burden on athletes' joints and muscles, improve comfort and sports experience.

8. Anti-UV and weather resistance

GZUNISPORT's acrylic sports flooring can resist the erosion of ultraviolet rays, rain and extreme climates, and is suitable for long-term outdoor use. The color and performance remain stable.

9. Economical and efficient

Compared with other types of professional sports floors, acrylic sports floors have a higher cost-effectiveness and are a choice that combines professionalism and economy.

How durable is an acrylic surface?

Acrylic surfaces are extremely durable, offering excellent wear and weather resistance. This material is commonly used in areas such as outdoor decoration, furniture, building materials, and artwork. The durability of acrylic surfaces stems primarily from its high strength and chemical resistance, allowing it to withstand daily use and a variety of environmental conditions. It is resistant to scratches and is UV resistant, making it less susceptible to yellowing or discoloration from prolonged exposure to sunlight. In addition, acrylic also has excellent impact resistance, which can reduce the occurrence of accidental damage to a certain extent.

How do you clean an acrylic court?

Cleaning your acrylic flooring court is a critical step in maintaining the appearance and performance of your court.

1. Use a soft brush or vacuum cleaner to remove dust and debris from the surface. Then, use a mild detergent mixed with water and gently wipe the surface with a soft cloth or sponge to remove dirt and stains. Avoid using strong acidic or alkaline cleaners as they may damage the acrylic surface. For stubborn stains, use a specialized acrylic cleaner and follow the product instructions.

2. After cleaning, rinse the court surface thoroughly with clean water to ensure that the detergent residue is completely removed. Finally, dry the surface with a clean cloth or sponge, or let the court dry naturally. Regular cleaning extends the life of your acrylic tennis court and ensures players enjoy the best possible gaming experience.

How many gallons of acrylic paint does it take to paint a tennis court?

Painting a standard-sized tennis court typically requires about 60 to 80 gallons of acrylic paint. The exact amount of paint required depends on the size of the tennis court, the surface material and the coverage of the chosen color. Generally speaking, use two coats of paint to ensure adequate coverage and durability of the surface. When determining the amount of paint, you also need to consider the paint consumption of primer and lines. Acrylic coating is often chosen for tennis court surfaces because it is wear-resistant, weather-resistant, anti-slip and easy to clean, providing players with a good playing experience and safety.

Can acrylic tennis court surfaces be pressure cleaned?

Under normal circumstances, the use of high-pressure cleaning can effectively remove dirt, dust and other debris from the surface, restore the cleanliness and brightness of the surface, and improve the appearance and use experience of the court. Of course too much pressure can damage the surface, causing the paint to peel off or become damaged. Therefore, before performing high-pressure cleaning, it is best to conduct a test in an inconspicuous area to determine the appropriate cleaning pressure and water spray angle. After cleaning, the cleaning fluid and remaining dirt should be thoroughly cleaned in time to avoid leaving chemical residues or water stains, which will affect the quality and durability of the surface.

What coatings are commonly used on outdoor tennis courts?

On outdoor tennis courts, the coatings often used are polyurethane or acrylic resin mixtures. This coating is wear-resistant, weather-resistant, anti-slip and provides stable performance in a variety of weather conditions. In addition, this coating can also provide appropriate elasticity, helping to reduce the impact of players' sports and reduce the occurrence of sports injuries. Its color, usually green or blue, helps players better see the trajectory of the ball. This coating is widely used on outdoor tennis courts to provide players with a good playing environment and experience.

Advantages of Acrylic Sports Flooring

In fact, the characteristics of acrylic material and silicon PU are similar. They are professional floor materials with good outdoor stability. The overall construction project and material concept are environmentally friendly.

1. It can be used in all weather conditions. After the acrylic is installed, due to the overall material structure mixing, the stability is greatly increased, heat and cold resistance, and the overall color is bright. It is one of the first choices for outdoor professional sports flooring.

2. Strong wear resistance, not easy to crack. Outdoor floor materials need stability very much. After all, there are more external factors, and acrylic has strong adhesion to the ground, and it is not easy to crack the surface if it is exposed to the sun or scratched.

3. Green environmental protection materials. The water-based material that the synthetic acrylic material belongs to is an odorless and non-toxic product, which conforms to the characteristics of global environmental protection.

4. Air permeability. Some materials will protrude and blister on the surface after being used for a long time, but acrylic will not. Generally, with maintenance, the life of acrylic can be as long as 7-15 years.