Running track systems for competition, training and community use
UNISPORT manufactures and exports synthetic running track systems for stadiums, schools, universities, sports clubs and municipal projects. Five systems cover the range from an entry-level school track to a World Athletics-certified competition surface, and each one is supplied as a package rather than a pallet of material: base specification, line-by-line material list, lane marking, installation supervision and after-sales support.
The system you choose settles three things at once — what the venue can host, what it costs per square metre, and how long it stays usable. The comparison below narrows that decision to one or two candidates. The individual product pages carry the full specification, consumption rates and layer-by-layer build-up.

Compare the five systems
Thickness, shock absorption and service life move together: a thicker base buys shock absorption, and shock absorption is what buys years. Read the table left to right and the trade-off is plain — the systems at the top host official competition, the ones at the bottom keep a primary school inside its budget.
Running track systems compared: certification, build-up, shock absorption and service life
| Track system | Certification | Build-up and thickness | Shock absorption | Service life | Best suited to |
| Full PU running track | IAAF / World Athletics | 8 mm poured PU base, wear coat, sprayed EPDM top | Excellent (>40%) | 12–15 years | Olympic and professional competition arenas |
| Mixed casting (hybrid) running track | IAAF / World Athletics | PU binder with SBR black crumb base, EPDM spray top; made to project thickness | Good (35–40%) | 10–12 years | University and municipal sports centres |
| Sandwich system running track | IAAF / World Athletics | 10 mm SBR crumb base, PU seal, 3 mm EPDM top (13 mm total) | Balanced (35–38%) | 8–10 years | High schools and training facilities |
| Spray coat running track | SGS / REACH | 12 mm rubber base, 3 mm PU and EPDM spray coat (15 mm total) | Standard (>35%) | 6–8 years | Primary schools and community parks |
| Prefabricated rubber running track | IAAF / World Athletics | Factory-vulcanised roll, identical thickness end to end; made to project thickness | Consistent across the roll | 10–15 years | High-traffic venues and fast-track installs |
Certification is quoted per system: spray coat is supplied to SGS and REACH rather than World Athletics. Thickness is set by the project — the build-ups above are the standard figures for each system, and the quotation states the finished thickness you are buying.
How each system is built
All five start the same way: a PU waterproof primer on a cured concrete or asphalt base. From there each system takes a different route to the wear layer, and that route is what you are paying for.
• Full PU competition track. A poured polyurethane system built from PU elastic material and EPDM colour granules, with no black rubber crumb anywhere in the base. It bonds tightly to the substrate, holds cohesive strength and keeps its colour under UV, which is why it is the default for venues that host official competition. Layer-by-layer detail and certification on the full PU athletic running track page.
• Mixed casting (hybrid) track. PU elastic binder mixed with SBR black crumb in the base, sprayed with EPDM granules on top. The base packs denser than a pure PU system, so it wears more slowly and keeps colour longer, and no loose granules work their way to the surface. Specification sheet on the mixed casting running track system page.
• Spray coat training track. The most widely used system for schools, area tracks and training grounds. A 12 mm rubber base takes a 3 mm PU and EPDM spray coat, which gives good pressure relief at the lowest cost per square metre in the range. Consumption rates and lead times on the spray coat running track system page.
• Sandwich system track. A 10 mm SBR crumb base sealed with PU, topped with a 3 mm EPDM wear layer and a clear PU coat. The seal is the point: it holds the base together, so shock absorption stays even across the surface instead of drifting where footfall is heaviest. Build-up on the sandwich system running track page.
• Prefabricated rubber track. Factory-vulcanised rolls that replace poured-in-place systems. Thickness is identical on every roll, there is no on-site mixing to get wrong, and installation starts the day the rolls land. Natural rubber supplies the elasticity, the weather resistance and the non-slip surface; it is non-toxic and needs no specialist maintenance. Specification on the prefabricated rubber running track page.
What arrives with the material order
The surface is the easy half. What decides whether a track opens on schedule is everything around it, so an order from us includes:
• Layout and lane geometry drawings, drawn against your site survey
• Base specification: slope, drainage falls, flatness tolerance and curing time before the primer goes down
• The full material package — PU primer, binder, SBR crumb, EPDM granules and line paint — calculated for your track area
• On-site technical supervision, with technicians available to travel to site for the pour
• After-sales repair support and a written warranty of 5 years
Manufacturing and compliance
We manufacture in Guangdong, southern China, in a 30,000 m² plant with an annual output of more than 60,000 tonnes of polyurethane track material — capacity built on two decades of track-surface formulation. Output at that scale is what lets a stadium or school programme be scheduled against a date instead of queued behind other orders.
Production runs to ISO 9001 and ISO 14001. Every competition system we supply is approved to World Athletics standards, with Class 1 certification available for venues that host official competition; spray coat systems are supplied to SGS and REACH compliance, which is what school and community tenders actually ask for. A copy of the certificate covering the specified system is issued with the quotation, so a specifier can check it before the tender closes.
Minimum order is 200 m² per system, which covers a single-lane training straight or a part-track replacement, and the standard lead time is 30 days from deposit. We ship to projects across South America, South-East Asia, Africa, the Middle East and East Asia. Referenced installations, with country, area and system used, are listed on our running track project page.
How a running track is built up in layers
Every system sits on the base in layers: a PU waterproof primer, a rubber crumb buffer, a sealing or wear coat, an EPDM spray top, and finally 50 mm lane lines in PU line paint. What changes between systems is the buffer — spray coat and sandwich systems use an SBR crumb buffer, while full PU pours a PU buffer with no crumb at all.
The full build-up, binder grades, consumption rates per square metre and base requirements are published in our running track materials and construction guide, so specifiers and main contractors can price a bill of quantities from it directly rather than asking us for a rate per square metre.
What the finished surface has to do
• Absorb impact without running slow — 35–40% or better across the range, above 40% on full PU
• Grip in the wet as firmly as in the dry
• Hold colour under UV instead of fading or cracking after the first summer
• Stay free of loose granules after seasons of spikes
• Clean with a brush and water — no specialist maintenance contract
• Meet heavy-metal limits on the materials, not only on the finished surface
Where our tracks are installed
• School and university athletics facilities
• Professional stadiums and competition arenas
• Public parks and community sports centres
• Sports clubs and training camps
• Government and municipal sports programmes
FAQ
1. How long does a synthetic running track last?
Between 6 and 15 years, depending on the system. Spray coat runs 6–8 years, sandwich 8–10, mixed casting 10–12, and full PU or prefabricated surfaces 12–15. Footfall, UV intensity and whether the surface is cleaned twice a year move those numbers more than anything else.
2. Do your running tracks carry IAAF or World Athletics certification?
Our full PU, mixed casting, sandwich and prefabricated systems are manufactured to World Athletics performance requirements and can be supplied certified for competition venues. Spray coat systems are supplied to SGS and REACH compliance, the usual requirement for school and community tracks.
3. What is the difference between a full PU track and a sandwich track?
A full PU track is poured polyurethane with no black rubber crumb in the base, so it returns the most energy and holds up to competition use. A sandwich track puts a 10 mm SBR crumb base under a PU seal and a 3 mm EPDM wear layer: softer underfoot, materially cheaper, and the usual choice for schools and training facilities.
4. What does a running track cost per square metre?
Three things decide it: the system, the finished thickness and the state of the base. Spray coat is the entry point, sandwich and mixed casting sit in the middle, and full PU or prefabricated surfaces cost the most. Send the track length, lane count and base type and we will quote against the actual bill of quantities rather than publish a rate that will not survive contact with your site.
5. Can I customise colour and thickness?
Yes. Colour, thickness and lane markings are all made to order, and club or school logos can be printed into the surface.
6. Do you provide installation?
We provide base construction guidance, the full material package and on-site technical supervision, and can send technicians to site to support the pour.
7. How long does installation take?
A standard-sized track takes 7 to 20 days, depending on the base condition, the system and the weather window.
8. Do you accept small orders for a single school or community track?
Yes. Our minimum order is 200 m² per system — enough for a single-lane training straight or a part-track repair — and the material order is sized to your actual track area.
Get a system recommendation and a bill of quantities
Send us five things and we will come back with one or two systems worth considering, plus a bill of quantities against your actual area:
1. Track length and lane count — or the site dimensions, if the layout is still open
2. Base type: existing asphalt, existing concrete, or a new build
3. Competition level: World Athletics competition, school sports, or community use
4. Location and climate, since freeze-thaw cycles and UV load change the specification
5. Target completion date
Attach a site plan or a photo of the base if you have one — it saves a round of questions. Write to info@gzunisport.com or use the enquiry form on this page.